Lessons
10.Generating Speed
11.Floaters
12.Slash
13.Reo (Off the Lip)
14.Carves
15.Tail Slides
16.Late Takeoffs
17.Layback Snap
18.Foam Climbs
19.360
20.Backside 360
21.Roundhouse Cutback
22.Backside Roundhouse
23.Surfing Big Waves
24.Tube Ride

10. Generating Speed - Surf Fast

Now that you can go along waves and maneuver your board to a certain degree its time to learn how generate speed and go surf fast along waves.
Every single wave possesses a sweet spot that is loaded with energy to make you go surf fast on it. To begin with you wont be able to see these areas so the key is to find them by moving your board up and down the wave face as you go along. The motion of moving your board up and down is called “Pumping” and it is the most effective way that you can generate speed and surf fast on a wave.

How Do You Really Surf Fast On A Wave

The more you pump on waves and find the sweet spots the more you will become aware of them and be able to visually see them. It sounds weird but once you start getting that feeling you will know what you need to look for in a waves curve and on the surface. The faster and harder you pump your board the more speed you will generate out of each pump. However don’t run before you can walk, someone who is trying to pump a board super hard before they have the correct motion down will make their surfing style look really ugly! If you don’t get the correct motion down first then it doesn’t matter how hard you pump you wont be able to generate any speed and surf fast, all it you will be doing is looking like you have a horrible surfing style.

A rule of thumb is that you will be able to generate a lot more speed and have more control on a wave that is a clean green faced wave rather th an a wave that is covered in a layer of white water and foam. The way a wave ends up getting covered in white water is if the wave in front of it is bigger. The bigger the wave generally means the further out it will break. So if a big wave breaks then the smaller one behind it does then the smaller one will be breaking in messy white water caused by the wave in front.
This is known as a foamy wave and is a lot harder to generate speed on and surf fast due to the pockets of air coming to the surface (the white stuff), these pockets of air means your board is going to feel a little less stable under your feet and your boards fins aren’t turning against solid H20 but hare having to slip and slide through the air bubbles.